TEL    0086-531-81172536
You are here: Home » News » The maintenance of hydraulic lifts

The maintenance of hydraulic lifts

Views:2     Author:Site Editor     Publish Time: 2019-01-10      Origin:Site

Please see as below for the tips of hydraulic lifts maintenance:

1. The contact opening and closing of the travel switch of each safety device must be reliable,and the contact arc pit should be polished in time.

2. When installing, disassembling and adjusting the rotary mechanism of the hydraulic lift,attention should be paid to ensuring that the center line of the reducer of the rotary

mechanism is parallel to the center line of the gear, and its meshing surface is not less than 70%, and the meshing clearance should be suitable.

3. Check the connection of each department regularly, and tighten it carefully. The connecting bolt of the hydraulic elevator body should be checked for tightness when the body is under pressure (the compression state can be caused by the method of rotating arm). All connecting slightly shafts must have open pins and be fully opened.

4. Lubrication and hydraulic oil of gearbox, gearbox, external meshing gear and other parts are carried out according to the requirements of the lubrication table.

5. Control boxes and distribution boxes should be kept clean regularly and dust on electrical equipment should be cleaned in time.

6. Attention should be paid to checking whether there are broken wires and loose strands in each wire rope. If it exceeds the relevant provisions, it must be renewed immediately.

Maintenance of wire rope should be carried out in strict accordance with regulations.


Are all the hydraulic lifts in the warehouse carefully maintained?

Hydraulic Car Scissor Lift

Jinan Saga Machinery Co.,Ltd
No.6,Huixin Road,Jiyang County ,Shandong

Your Advice
Copyright 2016 @ Jinan Saga Machinery Co.,Ltd. All Rights Reserved.